No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Exporting of IPv4/IPv6 Flexible Flow Statistics

Configuring Exporting of IPv4/IPv6 Flexible Flow Statistics

Context

After flexible flow statistics exporting is configured, the NDE classifies and collects statistics about packets based on the protocol type, DSCP priority, source IP address, destination IP address, source port number, destination port number and flow label.

Configuration Procedure

Configuring a Flexible Flow Statistics Template must be performed before Enabling NetStream Flexible Flow Statistics Collection on an Interface. The other configuration tasks are mandatory and can be performed in any sequence.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 50488

Downloads: 485

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next