No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for iPCA

Default Settings for iPCA

Table 5-4  Default settings of network-level packet loss measurement


Default Setting

UDP port used for communication between the DCPs and MCP 65030
Color bit in network-level packet loss measurement Bit 6 of the ToS field in the IP packet header
Measurement interval 10 seconds
Table 5-5  Default configuration of device-level packet loss measurement


Default Setting

Color bit in device-level packet loss measurement Bit 0 of the Flags field in the IP packet header
Measurement interval 10 seconds
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 51962

Downloads: 496

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next