No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, MAC Swap Loopback Configuration, EFM Configuration, CFM Configuration, Y.1731 Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configure DLDP Functions

Configure DLDP Functions

Pre-configuration Tasks

Before configuring DLDP, ensure that the interfaces on both ends work in non-auto-negotiation mode. When directly connected interfaces at both ends are configured with auto-negotiation and DLDP, if one unidirectional link fails, the two interfaces go Down due to auto-negotiation configuration.

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1100065682

Views: 27656

Downloads: 246

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next