No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Reliability

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, MAC Swap Loopback Configuration, EFM Configuration, CFM Configuration, Y.1731 Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Load Balancing

Load Balancing

When a switch is dual homed to upstream devices, only one uplink is forwarding traffic at a time, and the other uplink remains idle. Therefore, link utilization is only 50%. Smart Link supports load balancing instances. The standby link transmits traffic from VLANs associated with specified load balancing instances. In this way, traffic from different VLANs is shared between the two links.

In Figure 5-8, when no load balancing instance is configured, SwitchD forwards all packets through the active link connected to Interface1. To improve link utilization, configure a load balancing instance on SwitchD and associate VLAN 300 to VLAN 400 with the instance. Then, data packets sent from these VLANs are forwarded through Interface2. VLAN 100 to VLAN 200 are not associated with the load balancing instance, so packets sent from these VLANs are forwarded through Interface1. In this way, traffic from different VLANs is shared between the two links.

Figure 5-8  Load balancing in a Smart Link group
Updated: 2019-04-04

Document ID: EDOC1100065682

Views: 30053

Downloads: 253

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next