No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, MAC Swap Loopback Configuration, EFM Configuration, CFM Configuration, Y.1731 Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the VRRP Running Status

Monitoring the VRRP Running Status

Context

During routine maintenance, you can run the following commands to check VRRP Advertisement packet statistics and monitor the VRRP running status.

Procedure

  • Run the display vrrp [ interface interface-type interface-number ] [ virtual-router-id ] statistics command in any view to check statistics about sent and received packets of a VRRP group.
  • Run the display vrrp6 [ interface interface-type interface-number ] [ vrid virtual-router-id ] statistics command in any view to check statistics about sent and received packets of a VRRP6 group.
Translation
Download
Updated: 2019-04-04

Document ID: EDOC1100065682

Views: 26802

Downloads: 235

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next