No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S7700 and S9700 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Synchronous Ethernet

Application Scenarios for Synchronous Ethernet

In Figure 13-16, devices on the IP network are connected to each other, and clock synchronization needs to be implemented between upstream and downstream devices.

Figure 13-16  Synchronous Ethernet networking

To ensure reliability on the clock synchronization network, Device1 and Device4 each are connected to an external clock source to import clock signals. During network deployment, each device preferentially traces the clock signals sent from Device1. If the clock source connected to Device1 is faulty, devices trace the clock signals sent from Device4.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065738

Views: 40281

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next