No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S7700 and S9700 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for PoE

Default Settings for PoE

Table 5-4  Default settings for PoE

Parameter

Default Setting

Power management mode

Auto

Power supply priority of an interface

Low

Maximum output power of an interface

The maximum output power of an interfaces on the ES0D0G48VA00 is 37000mW, and the maximum output power of an interfaces on the ES1D2G48VX5S and ES1D2G48VX5E is 60000mW.

Reserved PoE power percentage

20%

PoE power alarm threshold

90%

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065738

Views: 40345

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next