No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S7700 and S9700 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying the Environment Monitoring Software Version

Displaying the Environment Monitoring Software Version

Context

The card monitoring module (CANbus) and system management software (SMS) are used to implement basic management and maintenance on cards, for example, monitoring the temperature, power supply, and voltage. You can run the following command to check the software version of the CANbus and SMS.

Procedure

  • Run the display environment version command to view the CANbus version of a specified card and SMS.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065738

Views: 44994

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next