No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S7700 and S9700 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Packet Statistics in an SVF System

Clearing Packet Statistics in an SVF System

Context

Before collecting AS Discovery packet statistics in an SVF system, clear the existing statistics and then run the display uni-mng as-discover packet statistics interface fabric-port port-id command to check AS Discovery packet statistics.

Procedure

  1. Run the reset uni-mng as-discover packet statistics interface fabric-port port-id command to clear AS Discovery packet statistics.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065738

Views: 40901

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next