No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S7700 and S9700 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling an SAID Node

Disabling an SAID Node

Context

By default, the device detects and diagnoses all SAID nodes. If a certain service is not deployed on the device or does not need to be detected or diagnosed, disable the corresponding SAID node.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run set said-node { all | said-name &<1-6> } disable

    An SAID node is disabled.

    By default, all SAID nodes are enabled.

Verifying the Configuration

  • Run the display said-node { all | said-name } brief [ slot slot-id ] command to view brief information about SAID nodes.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065738

Views: 39650

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next