No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S7700 and S9700 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for OIDS

Licensing Requirements and Limitations for OIDS

Involved Network Elements

Other network elements are not required.

Licensing Requirements

OIDS is a basic feature of a switch and is not under license control.

Version Requirements

Table 7-2  Products and versions supporting OIDS



Software Version




This feature is supported only when MCUD is installed.

S7706, S7712

V200R012C00, V200R013C00

This feature is supported only when SRUH or SRUE is installed.

S7703 PoE


This feature is supported only when MCUD is installed.

S7706 PoE


This feature is supported only when SRUH or SRUE is installed.


S9703, S9706, S9712

Not supported
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

Only the switches that use MCUDs, SRUHs, or SRUEs support OIDS.

Currently, only the CPU-CHAN diagnosis type supports the OIDS diagnosis function.

Pay attention to the following when querying OIDS monitoring and diagnosis information:
  • On a dual-MPU or cluster switch, run the collect oids database file to system-master command in the system view to save OIDS database files to the active MPU before querying OIDS monitoring and diagnosis results.

  • The contents of OIDS database files cannot be manually modified.

  • OIDS database files are stored according to the actual situation at that time and can be queried only according to the actual saved information at that time. For example, if an LPU originally resides in slot 1 and is now removed and re-installed in slot 2, to query LPU information generated before the LPU is removed, check the information by specifying slot 1 in the display command. Focus on the following when checking OIDS database files:
    • LPUs are removed and then re-installed.
    • The cluster ID changes.
    • The system time changes.
  • If an interface is Down, the switch does not collect attribute data from the interface or record the data in the database files.

Updated: 2019-04-20

Document ID: EDOC1100065738

Views: 40209

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next