No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S7700 and S9700 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Electronic Labels

Displaying Electronic Labels

Context

Electronic labels identify hardware information about a device, including the serial number, manufacturing date, device model, and hardware description. You can check electronic labels to obtain SNs before returning hardware for repair or to obtain hardware information such as the hardware manufacturing date.

Procedure

  • Run the display elabel [ chassis-id[/slot-id][/subcard-id] ] [ brief ] command to view the electronic labels of a device.

    NOTE:

    The electronic label version of devices delivered since V200R011 has been updated to version 4.0. This version adds the following fields compared to earlier versions:

    • Model indicates the hardware external model of the device.
    • ExInfo indicates the hardware extension information of the device. This field is not provided in electronic labels of optical modules.
    • ElabelVersion indicates the version of the elabel.

  • Run the display elabel backplane [ chassis chassis-id ] command to view the backplane electronic label.

    The chassis chassis-id parameter is supported only in a cluster.

FAQ

How Can I View the Chassis Electronic Label?

Run the display elabel backplane [ chassis chassis-id ] command to view the electronic label of a specified chassis. The chassis chassis-id parameter is only supported in a cluster.
<HUAWEI> display elabel backplane chassis 2           
Info: It is executing, please wait... 

[BackPlane_1]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
 
[Board Properties]
BoardType=ES0B17712
BarCode=2102113308P0AC000021
Item=02113308
Description=Quidway S7712,ES0B17712,S7712 POE Assembly Chassis
Manufactured=2010-12-31
VendorName=Huawei
IssueNumber=00
CLEICode=
BOM=

How Can I View the Card Electronic Label?

Run the display elabel chassis-id/slot-id command to view the electronic label of a specified card. chassis-id/slot-id specifies the chassis ID and slot ID.
<HUAWEI> display elabel 1/4           
Info: It is executing, please wait...                                                                                               
                                                                                                                                    
[Slot_4]                                                                                                                            
/$[Board Integration Version]                                                                                                       
/$BoardIntegrationVersion=3.0                                                                                                       
                                                                                                                                    
                                                                                                                                    
[Main_Board]
/$[ArchivesInfo Version] 
/$ArchivesInfoVersion=3.0 

                                                                                                                        
[Board Properties]                                                                                                                  
BoardType=ES02G24SC
BarCode=030MQN10AB000014
Item=03030MQN
Description=Quidway S7700,ES02G24SC,24-Port 100/1000BASE-X Interface Card(EC,SFP
),128K MAC
Manufactured=2010-11-27
VendorName=Huawei
IssueNumber=00
CLEICode=
BOM=

How Can I View the Power Supply Electronic Label?

Run the display elabel chassis-id/slot-id command to view the electronic label of a specified power module. chassis-id/slot-id specifies a chassis ID and power module slot ID.
<HUAWEI> display elabel 1/PWR1
Info: It is executing, please wait...

[Slot_13]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0
 
 
[Main_Board] 
DATE=10_11_04
SN=2102130859210B010005
TYPE=LE02PSA08

How Can I View the Fan Module Electronic Label?

Run the display elabel chassis-id/slot-id command to view the electronic label of a specified fan module. chassis-id/slot-id specifies a chassis ID and fan module slot ID.
<HUAWEI> display elabel 1/FAN1
Info: It is executing, please wait...

[Slot_17]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0


[Main_Board]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0


[Board Properties]
BoardType=LE0E2FBX
BarCode=2102120554P0AB001580
Item=02120554
Description=Wide Voltage Fan Box
Manufactured=2010-12-03
VendorName=Huawei
IssueNumber=00
CLEICode=
BOM=

How Can I View the Optical Module Electronic Label?

Run the display elabel [ chassis-id[/slot-id] ] command to view the electronic label of the interface where the optical module resides. chassis-id/slot-id specifies the card or subcard where the optical module resides.
<HUAWEI> display elabel 1/4
......
[Port_XGigabitEthernet4/0/1]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0


[Board Properties]
BoardType=PLRXPLSCS4322N
BarCode=CB02UF1SW
Item=
Description=10300Mb/sec-850nm-LC-33(OM1),82(OM2),300(OM3),400(OM4)
Manufactured=2011-01-09
/$VendorName=JDSU
IssueNumber=
CLEICode=
BOM=
......

How Can I View the Part Number and What Is the Relationship Between the Part Number and BarCode?

The part number and BarCode identify a hardware component. The part number is the basic component number and often identifies the type of components. It is the value of Item in an electronic label. BarCode is a unique serial number.

To apply for a license, authenticate a device, replace a device, or return a device for repair, you must provide the device's serial number to the manufacturer.

To return a card or subcard for repair or replacement, you must provide its part number to the manufacturer.

<HUAWEI> display elabel 1/13
Info: It is executing, please wait...

[Slot_13]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0


[Main_Board]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0


[Board Properties]
BoardType=ES0D00SRUA00
BarCode=03030RPE10xxxxxxxx     //Indicates the serial number.
Item=03030RPE                  //Indicates the part number.
Description=
Manufactured=2010-12-04
VendorName=Huawei
IssueNumber=00
CLEICode=
BOM=

What Are the MIB OIDs of Electronic Labels?

The following table describes the MIB OIDs of electronic labels.

Object Name

OID

Syntax

Description

Max Access

hwEntityBomId

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.1

SnmpAdminString

This object indicates the entity part number. The value is displayed in the Item field in the device's electronic label.

read-only

hwEntityBomEnDesc

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.2

SnmpAdminString

This object indicates the description of the entity.

read-only

hwEntityManufacturedDate

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.4

DateAndTime

This object indicates the entity manufacturing date.

read-only

hwEntityCLEICode

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.6

SnmpAdminString

This object indicates the entity CLEI code.

read-only

hwEntityArchivesInfoVersion

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.8

SnmpAdminString

This object indicates the entity manufacturing information version.

read-only

hwEntityOpenBomId

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.9

SnmpAdminString

This object indicates the allocated part number, which is different from hwEntityBomId and describes an item number. The value is displayed in the BOM field in the device's electronic label.

read-only

hwEntityIssueNum

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.10

SnmpAdminString

This object indicates the entity issue number.

read-only

hwEntityBoardType

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.11

SnmpAdminString

This object indicates the entity type.

read-only

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065738

Views: 44942

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next