No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S7700 and S9700 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Clock Source

Configuring a Clock Source

Context

To implement clock synchronization on a switch, configure a clock source first. A switch supports BITS, PTP and line clock sources. The configuration varies according to the clock source type. Follow the configuration procedure appropriate to the clock source used in your network.

Pre-configuration Tasks

Before configuring a clock source, complete the following tasks:

  • Connect devices that require synchronous Ethernet with clock cables or Ethernet interfaces to establish a clock synchronization network.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065738

Views: 43631

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next