No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S7700 and S9700 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I View the Serial Number of a Fan Module?

How Can I View the Serial Number of a Fan Module?

Method 1: Obtain the Fan Module Serial Number by Using a Command

Run the display elabel command to view electronic label information, and select the fan module number according to the command prompt information. In the command output, BarCode specifies the fan module serial number.
<HUAWEI> display elabel ?
  <1-1>      The present chassis                                                
  backplane  Backplane                                                          
  brief      Display information briefly                                        
<HUAWEI> display elabel 1/?
  <5,8,13,16>                             <CMU1>
  <FAN1-FAN5>                             <PWR1-PWR4>
<HUAWEI> display elabel 1/FAN2
Info: It is executing, please wait...                                           
/$[Board Integration Version]                                                   
/$[ArchivesInfo Version]                                                        
[Board Properties]                                                              

The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding fan module parameters.

Method 2: Obtain the Fan Module Serial Number Onsite

You can obtain the fan module serial number onsite. The fan module serial number label is attached on the upper right corner at the front side and is a one-dimensional label, as shown in Figure 1-8.

Figure 1-8  Location of the serial number label
Updated: 2019-04-20

Document ID: EDOC1100065738

Views: 43702

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next