No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S7700 and S9700 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Memory Usage Alarm Threshold

Configuring the Memory Usage Alarm Threshold

Context

Memory usage is an important indicator used to evaluate device performance. A high memory usage may cause service faults. If high memory usage occurs when processing data, the device can generate an alarm. This enables you to monitor memory usage and optimize system performance.

  • Memory usage alarm threshold

    When memory usage reaches this threshold, the system generates an alarm.

  • Memory usage alarm recovery threshold

    When memory usage falls below this threshold, the system clears the alarm.

Procedure

  1. (Optional) Run display memory-usage threshold [ slot slot-id ]

    The memory usage configuration is displayed.

  2. Run system-view

    The system view is displayed.

  3. Run set memory-usage threshold threshold-value [ slot slot-id ]

    The memory usage alarm threshold is set.

    By default, when the switch uses MCUD, SRUH or SRUE:
    • If the memory capacity on the device is lower than or equal to 512 MB, the memory usage alarm threshold is 85% and the memory usage alarm recovery threshold is 80%.

    • If the memory capacity on the device is larger than 512 MB and smaller than or equal to 1.5 GB, the memory usage alarm threshold is 90% and the memory usage alarm recovery threshold is 85%.

    • If the memory capacity on the device is higher than 1.5 GB, the memory usage alarm threshold is 95% and the memory usage alarm recovery threshold is 90%.

    By default, when the switch uses other MPU models:
    • If the memory capacity on the device is lower than or equal to 512 MB, the memory usage alarm threshold is 85% and the memory usage alarm recovery threshold is 80%.

    • If the memory capacity on the device is larger than 512 MB and smaller than or equal to 2 GB, the memory usage alarm threshold is 90% and the memory usage alarm recovery threshold is 85%.

    • If the memory capacity on the device is higher than 2 GB, the memory usage alarm threshold is 95% and the memory usage alarm recovery threshold is 90%.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065738

Views: 44737

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next