Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting ASs to the Parent Directly
Context
As shown in Figure 4-7, ASs in an SVF system are classified into level-1 and level-2 ASs. You can connect a level-1 AS to the parent and then a level-2 AS to the level-1 AS.
By default, you do not need to configure the ports that connect a level-1 AS to the parent and connect a level-2 AS to the level-1 AS because ASs are plug-and-play. You only need to configure fabric ports that connect the parent to a level-1 AS and connect a level-1 AS to a level-2 AS. Figure 4-8 illustrates the process of connecting an AS to the parent directly.
Previous
