No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S7700 and S9700 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using the CSS Assistant Tool to Quickly Obtain Information

Using the CSS Assistant Tool to Quickly Obtain Information

Figure 3-1 shows the CSS assistant tool page.
Figure 3-1  CSS assistant tool page
Figure 3-2 describes how to use this tool:
  1. Starting from Stack & SVF type, select S Switches CSS > Switch series > Switch name > MPU model > CSS mode > CSS card or LPU > Cluster cable in sequence.

    Click behind each select box to obtain images.

  2. Click Query after finishing the selection. The CSS precautions, connection rules, and software configuration are displayed. Set up a CSS according to the information.

Figure 3-2  Tool page after Query is clicked
Updated: 2019-04-20

Document ID: EDOC1100065738

Views: 45037

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next