No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Interface Management

S7700 and S9700 V200R013C00

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can Two Interfaces at Both Ends of a Link Determine the Rate and Duplex Mode Through Auto-Negotiation?

How Can Two Interfaces at Both Ends of a Link Determine the Rate and Duplex Mode Through Auto-Negotiation?

The auto-negotiation function provides an information exchange method for connected devices. After auto-negotiation is enabled, devices at both ends of a physical link can exchange information and automatically choose the same working parameters. In this way, the two devices can work at the maximum rate supported by both of them. For example, a GE interface connects to an FE interface and their rate is negotiated to 100 Mbit/s, which is the maximum rate supported by both of them.

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1100065741

Views: 6613

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next