No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R013C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, IPv4 PIM, IPv6 PIM, MSDP, multicast VPN, layer 3 multicast CAC, IPv4 multicast route management, IPv6 multicast route management, IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, layer 2 multicast CAC, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Multicast Hash Algorithm

Configuring the Multicast Hash Algorithm

Context

To improve multicast forwarding performance, the switch uses a hash algorithm to learn multicast addresses. When a large number of multicast hash collisions occur, the switch will fail to learn some multicast addresses. If this occurs, you can change the multicast hash algorithm to reduce hash collisions.

MAC addresses are randomly distributed on a network, so the best hash algorithm cannot be determined. The default hash algorithm is the best algorithm in most cases, so changing the hash algorithm is not recommended.

After changing the hash algorithm, restart the switch for the configuration to take effect.

Default Settings

The default multicast hash algorithm is crc-32-lower.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run set multicast-hash-mode { crc-32-upper | crc-32-lower | lsb | crc-16-upper | crc-16-lower }

    The multicast hash algorithm is specified.

    NOTE:

    This command is not supported by X series cards.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065742

Views: 44068

Downloads: 40

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next