No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Multicast

S7700 and S9700 V200R013C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, IPv4 PIM, IPv6 PIM, MSDP, multicast VPN, layer 3 multicast CAC, IPv4 multicast route management, IPv6 multicast route management, IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, layer 2 multicast CAC, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of IPv4 PIM Configuration Tasks

Summary of IPv4 PIM Configuration Tasks

Table 4-2 lists IPv4 PIM configuration tasks.

Table 4-2  PIM configuration tasks
Task Description

Configuring IPv4 PIM-DM

PIM-DM uses the ASM model to provide multicast services. The configuration is simple, but multicast data is periodically broadcast. PIM-DM applies to small networks with densely distributed group members.

Configuring IPv4 PIM-SM

PIM-SM uses the ASM and SSM models to provide multicast services. In the ASM model, a multicast distribution tree (MDT) is set up based on receivers' request to join multicast groups. PIM-SM needs to maintain an RP, set up an RPT, and register multicast sources. The ASM model applies to the large network where members are widely distributed. In the SSM model, PIM-SM sets up an SPT between a multicast source and members and does not need to maintain an RP, set up an RPT, or register multicast sources. The SSM model applies to networks where users know the multicast source locations and directly request multicast data from a specified multicast source.

Configuring multi-instance PIM, which is included in all configuration tasks

To implement multi-instance PIM, configure PIM in multiple VPN instances. This feature allows multicast data from private networks to be forwarded in VPN instances. PIM configurations in different VPN instances do not affect each other.
Updated: 2019-04-08

Document ID: EDOC1100065742

Views: 42278

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next