No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R013C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, IPv4 PIM, IPv6 PIM, MSDP, multicast VPN, layer 3 multicast CAC, IPv4 multicast route management, IPv6 multicast route management, IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, layer 2 multicast CAC, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of MSDP

Monitoring the Running Status of MSDP

Context

During routine maintenance, you can run the following commands in any view to check MSDP running status.

Procedure

  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] brief [ state { connect | down | listen | shutdown | up } ] command to check brief information about MSDP peers.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] peer-status [ peer-address ] command to check detailed information about MSDP peers.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] sa-cache [ group-address | source-address | [ as-number-plain | as-number-dot ] ] * command to check (S, G) information in the SA cache.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] sa-count [ as-number-plain | as-number-dot ] command to check the number of (S, G) entries in the SA cache.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] control-message counters [ peer peer-address | message-type { source-active | sa-request | sa-response | keepalive | notification | traceroute-request | traceroute-reply | data-packets | unknown-type } ] * command to check statistics about received, sent, and discarded MSDP packets.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] invalid-packet [ peer peer-address | message-type { keepalive | notification | sa-request | sa-response | source-active } ] * command to check statistics about invalid MSDP packets received.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] rpf-peer original-rp original-rp-address command to check information about all the RPF peers of the specified source RP address, including RPF peer selection rules and RPF route types.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065742

Views: 42021

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next