No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R013C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, IPv4 PIM, IPv6 PIM, MSDP, multicast VPN, layer 3 multicast CAC, IPv4 multicast route management, IPv6 multicast route management, IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, layer 2 multicast CAC, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Statistics on MSDP Peers

Clearing Statistics on MSDP Peers

Context

When you clear statistics on MSDP peers, you can determine whether to reset TCP connections between MSDP peers. Resetting TCP connections will affect MSDP running.

Statistics on MSDP peers cannot be restored after you clear them. Therefore, exercise caution when you run the command.

Procedure

  • Run the reset msdp [ vpn-instance vpn-instance-name | all-instance ] peer [ peer-address ] command in the user view to reset the TCP connection with a specified MSDP peer and clear statistics about the specified MSDP peer.
  • Run the reset msdp [ vpn-instance vpn-instance-name | all-instance ] statistics [ peer-address ] command in the user view to clear statistics about one or more MSDP peers but not to reset TCP connections.
  • Run the reset msdp [ vpn-instance vpn-instance-name | all-instance ]control-message counters [ peer peer-address ] command in the user view to clear statistics about received, sent, and discarded MSDP messages.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065742

Views: 48568

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next