No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R013C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, IPv4 PIM, IPv6 PIM, MSDP, multicast VPN, layer 3 multicast CAC, IPv4 multicast route management, IPv6 multicast route management, IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, layer 2 multicast CAC, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for MLD Snooping

Application Scenarios for MLD Snooping

Networking Description

In Figure 12-5, HostA and HostC on the LAN want to receive video data from the multicast source on the IPv6 PIM network. To prevent broadcast of multicast data on the LAN, MLD snooping needs to be configured on the Layer 2 multicast device (switch). The switch then can accurately forward multicast data on the Layer 2 network, preventing waste of bandwidth and information leakage.

Figure 12-5  MLD snooping network

Deployment

Perform the following configuration to enable accurate multicast data forwarding on the network shown in Figure 12-5:

  • Enable IPv6 PIM and MLD on the Layer 3 multicast device (router) to forward multicast data to user segments.
  • Enable MLD snooping on the Layer 2 device (switch). The switch then creates and maintains a Layer 2 multicast forwarding table to forward multicast data to specified users.
  • Enable MLD snooping proxy on the switch to prevent the router from processing redundant MLD messages.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065742

Views: 42336

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next