No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R013C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, IPv4 PIM, IPv6 PIM, MSDP, multicast VPN, layer 3 multicast CAC, IPv4 multicast route management, IPv6 multicast route management, IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, layer 2 multicast CAC, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic IGMP Function Configuration

Verifying the Basic IGMP Function Configuration

Context

After completing basic IGMP configuration on an interface, you can run the following commands in any view to check the IGMP configuration, IGMP running information, and membership information on the interface.

Procedure

  • Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] interface [ interface-type interface-number | up | down ] [ verbose ] command to check the IGMP configuration and running information on an interface.
  • Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] group [ group-address | interface interface-type interface-number ]* [ verbose ] command to check information about the members that have dynamically joined a multicast group.
  • Run the following commands to check information about members of a static multicast group.

    • Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] group [ group-address ] static [ up | down ] [ verbose ] command to check the interfaces that are in Up or Down state and have been statically bound to a multicast group.
    • Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] group [ group-address ] static interface-number command to check the number of interfaces that have joined a static multicast group.
    • Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] group [ group-address ] interface interface-type interface-number static [ verbose ] command to check information about static multicast groups on a specified interface.
    • Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] group static interface interface-type interface-number entry-number command to check the number of static groups that a specified interface has joined.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065742

Views: 47783

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next