No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R013C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, IPv4 PIM, IPv6 PIM, MSDP, multicast VPN, layer 3 multicast CAC, IPv4 multicast route management, IPv6 multicast route management, IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, layer 2 multicast CAC, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring MSDP Anycast RP

Configuring MSDP Anycast RP

Context

Anycast RP allows multiple RPs in a PIM-SM domain to have the same address and set up MSDP peers. In this way, a multicast source can register to the closest RP, and receivers can join the closest RP.

Pre-configuration Tasks

Enable Protocol Independent Multicast - Sparse Mode (PIM-SM) on all switches in the PIM-SM domain, without configuring RP.

Configuration Procedure

Perform configuration tasks in the listed order.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065742

Views: 46363

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next