Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Binding User VLANs to a Multicast VLAN
Context
A user VLAN can be bound to a multicast VLAN on a user-side interface. A user VLAN cannot be bound to more than one multicast VLAN on the same interface.
Procedure
- Run system-view
The system view is displayed.
- Run interface interface-type interface-number
The interface view is displayed.
- Run l2-multicast-bind vlan vlan-id1 [ to vlan-id2 ] mvlan mvlan-id
User VLANs are bound to a multicast VLAN on the interface.
![]()
NOTE: If you want to configure Layer 2 multicast Call Admission Control (CAC) on an interface after you bind a user VLAN to a multicast VLAN on the interface, pay attention to the following points:- Do not configure a limit on the number of groups on the interface.
- When configuring a limit on the number of groups in a VLAN on the interface, ensure that the VLAN is not the user VLAN or multicast VLAN.
For details about Layer 2 multicast CAC, see Layer 2 Multicast CAC Configuration.
Previous
