No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Multicast

S7700 and S9700 V200R013C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, IPv4 PIM, IPv6 PIM, MSDP, multicast VPN, layer 3 multicast CAC, IPv4 multicast route management, IPv6 multicast route management, IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, layer 2 multicast CAC, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of IPv4 Multicast Route Management Configuration Tasks

Summary of IPv4 Multicast Route Management Configuration Tasks

Table 9-7 lists IPv4 multicast route management configuration tasks.

Table 9-7  IPv4 multicast route management configuration tasks
Task Description

Configuring RPF Check Policies

Applies different route selection policies to adapt to different multicast service scenarios.

Configuring a Multicast Boundary

Restricts the scope of multicast forwarding.

Disabling Software Forwarding for Multicast Packets

Prevents packet loss and mis-sequencing caused by software forwarding.

Configuring Parameters for Controlling the MFIB

Allows you to adjust the number of multicast forwarding entries and the number of downstream nodes.

Using MPing to Check Multicast Service Performance

Triggers creation of a multicast tree and detects members of reserved multicast groups on the network.

Using Tracert to Check Multicast Service Performance

Tracks the path to a multicast receiver along a multicast distribution tree.

Updated: 2019-04-08

Document ID: EDOC1100065742

Views: 48215

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next