No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R013C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, IPv4 PIM, IPv6 PIM, MSDP, multicast VPN, layer 3 multicast CAC, IPv4 multicast route management, IPv6 multicast route management, IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, layer 2 multicast CAC, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Upper and Lower Alarm Thresholds for Multicast Protocol Entries

Configuring the Upper and Lower Alarm Thresholds for Multicast Protocol Entries

Pre-configuration Tasks

Before configuring the upper and lower alarm thresholds for multicast protocol entries, complete the following tasks:

  • Configure basic Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) functions.
  • Configure basic Protocol Independent Multicast (PIM) functions.
  • Enable the multicast management information base (MIB) trap function.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065742

Views: 41704

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next