No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R013C00

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, IPv4 PIM, IPv6 PIM, MSDP, multicast VPN, layer 3 multicast CAC, IPv4 multicast route management, IPv6 multicast route management, IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, layer 2 multicast CAC, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Interval for Sending Trap Messages About Group Join Failures Caused by IPv4 Multicast CAC Limit Exceeding

Setting the Interval for Sending Trap Messages About Group Join Failures Caused by IPv4 Multicast CAC Limit Exceeding

Context

By setting the interval for sending trap messages about failures to join a group due to IPv4 multicast Call Admission Control (CAC) limit exceeding, you can monitor the current states of multicast protocol events. Perform the following steps on the switch managed by the network management station.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run multicast-mib

    The multicast management information base (MIB) view is displayed.

  3. Run multicast trap-interval cac min-interval

    The interval for sending trap messages group join failures caused by IPv4 multicast CAC limit exceeding is set.

    The default interval is 0.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065742

Views: 43338

Downloads: 40

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next