No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S7700 and S9700 V200R013C00

This document describes the configurations of IP service, including IP address, ARP, DHCP, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the TCP6 Configuration

Verifying the TCP6 Configuration

Procedure

  • Run the display tcp ipv6 status [ [ task-id task-id [ socket-id socket-id ] ] | [ local-ip ipv6-address ] [ local-port local-port-number ] [ remote-ip ipv6-address ] [ remote-port remote-port-number ] ] command to check the status of all TCP6 connections.
  • Run the display tcp ipv6 statistics command to check TCP6 traffic statistics.
  • Run the display udp ipv6 statistics command to check UDP6 statistics.
  • Run the display ipv6 socket [ socktype socket-type | task-id task-id socket-id socket-id ] command to check information about a specified socket.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065743

Views: 28765

Downloads: 31

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next