No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S7700 and S9700 V200R013C00

This document describes the configurations of IP service, including IP address, ARP, DHCP, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for IPv6 over IPv4 Tunnels

Licensing Requirements and Limitations for IPv6 over IPv4 Tunnels

Involved Network Elements

Other network elements are not required.

Licensing Requirements

The IPv6 function must be enabled for the IPv6 over IPv4 tunnel function. The IPv6 function is controlled by a license. By default, the IPv6 function is disabled on a new device. To use the IPv6 function, apply for and purchase the license from the device supplier.

For details about how to apply for a license, see Obtaining Licenses in the S7700 and S9700 Series Switches License Usage Guide.

Version Requirements

Table 12-1  Products and versions supporting the IPv6 over IPv4 tunnel function

Product

Product Model

Software Version

S7700

S7703, S7706, and S7712

V100R003C01, V100R006C00, V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S7703 PoE

V200R013C00

S7706 PoE

V200R013C00

S9700

S9703, S9706, and S9712

V200R001(C00&C01), V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

  • The XGE interface connected to the ET1D2IPS0S00, ET1D2FW00S00, ET1D2FW00S01, ET1D2FW00S02, or ACU2 card does not support the IPv6 over IPv4 tunnel function.

  • The X1E series cards support the IPv6 over IPv4 tunnel function since V200R009C00.

  • The X2E, X2H, and X2S series cards support the IPv6 over IPv4 tunnel function since V200R010C00.

  • The X5E, X5H, X5L, and X5S series cards support the IPv6 over IPv4 tunnel function since V200R013C00.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065743

Views: 30095

Downloads: 31

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next