No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Service

S7700 and S9700 V200R013C00

This document describes the configurations of IP service, including IP address, ARP, DHCP, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel and IPv4 over IPv6 tunnel.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the DHCPv6 DUID

Configuring the DHCPv6 DUID


The DUID identifies a DHCPv6 device. Each DHCPv6 server or client has a unique DUID. DHCPv6 servers use DUIDs to identify DHCPv6 clients and DHCPv6 clients use DUIDs to identify DHCPv6 servers.


  1. Run system-view

    The system view is displayed.

  2. Run dhcpv6 duid { ll | llt | duid }

    A DUID is configured for the device.

    By default, the device generates a DUID based on the link-layer (LL) address.

Updated: 2019-04-20

Document ID: EDOC1100065743

Views: 34611

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next