No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Service

S7700 and S9700 V200R013C00

This document describes the configurations of IP service, including IP address, ARP, DHCP, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel and IPv4 over IPv6 tunnel.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a DHCPv6 PD Client

Configuring a DHCPv6 PD Client

Pre-configuration Tasks

When the DHCPv6 PD client function is configured on the device, the device dynamically obtains IPv6 address prefix and other network configuration parameters from the DHCPv6 PD server.

Before configuring the DHCPv6 PD client function, complete the following tasks:

  • Configure a DHCPv6 PD server.

  • Configure the DHCPv6 relay agent as service requires.

  • Configure the switch between the router and DHCPv6 relay agent or PD server.

Updated: 2019-04-20

Document ID: EDOC1100065743

Views: 34441

Downloads: 33

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next