No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Service

S7700 and S9700 V200R013C00

This document describes the configurations of IP service, including IP address, ARP, DHCP, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a DNS Server Address for RA Packets

Configuring a DNS Server Address for RA Packets


In a scenario where IPv6 ND stateless address auto-configuration is used or DHCPv6 is not configured, configure a DNS server address for RA packets so that the host can implement the DNS service using the DNS server address in RA packets.


  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The specified interface view is displayed.

  3. Run ipv6 nd ra dns-server ipv6-address [ valid-lifetime ]

    A DNS server address is configured for the RA packets transmitted on the interface.

    By default, RA packets do not contain a DNS server address.

    A maximum of eight DNS server addresses can be configured for the RA packets transmitted on the same interface.

Updated: 2019-04-20

Document ID: EDOC1100065743

Views: 27289

Downloads: 31

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next