No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Service

S7700 and S9700 V200R013C00

This document describes the configurations of IP service, including IP address, ARP, DHCP, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel and IPv4 over IPv6 tunnel.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a DHCPv6 Relay Agent

Configuring a DHCPv6 Relay Agent

Pre-configuration Tasks

A DHCPv6 relay agent enables the DHCPv6 client and server on different links to exchange DHCPv6 messages. The DHCPv6 relay agent forwards DHCP messages to the destination DHCPv6 server on a different network segment. DHCPv6 clients on multiple networks can share one DHCPv6 server.

Before configuring a DHCPv6 relay agent, complete the following tasks:

  • Configure the peer DHCPv6 server or DHCPv6 PD server.

  • Configure a route from the switch to the DHCPv6 server or DHCPv6 PD server.

Updated: 2019-04-20

Document ID: EDOC1100065743

Views: 34895

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next