No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

S7700 and S9700 V200R013C00

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, IP Routing Table Management, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Preventing a Static Route from Being Selected If the Associated BFD Session Is in AdminDown State

(Optional) Preventing a Static Route from Being Selected If the Associated BFD Session Is in AdminDown State

Context

If the BFD session associated with a static route on the switch is in AdminDown state, you can configure the switch not to select the static route. This ensures that the switch can work together with non-Huawei devices.

By default, a static route can still be selected by the switch even if the BFD session associated with it is in AdminDown state. However, this is not the case for non-Huawei devices. As a result, the switch cannot interwork with non-Huawei devices.

To address this problem, run the ip route-static track bfd-session admindown invalid command to configure the switch not to select the static route if the associated BFD session is in AdminDown state.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ip route-static track bfd-session session-name bfd-name admindown invalid

    The switch is configured not to select the static route if the associated BFD session is in AdminDown state.

    By default, a static route can still be selected by the switch even if the associated BFD session is in AdminDown state.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065744

Views: 66676

Downloads: 52

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next