No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

S7700 and S9700 V200R013C00

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, IP Routing Table Management, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Disabling OSPF IP FRR on an Interface

(Optional) Disabling OSPF IP FRR on an Interface

Context

OSPF IP FRR can be disabled on an interface of a specific device that is running important services. This prevents the device connected to this interface from providing a backup link for the local device and therefore being burdened after FRR switches traffic to the backup link.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The view of the OSPF IP FRR-enabled interface is displayed.

  3. Run ospf frr block

    OSPF IP FRR is disabled on the interface.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065744

Views: 57394

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next