No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Unicast Routing

S7700 and S9700 V200R013C00

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, IP Routing Table Management, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring OSPFv3 GR

Configuring OSPFv3 GR

Applicable Environment

Configure OSPFv3 Graceful Restart (GR) to avoid route flapping and packet loss after an OSPFv3 switch restarts.

After OSPFv3 restarts, the GR restarter and GR helper maintain the neighbor relationship, exchange routing information, synchronize the database, and update the routing table and the forwarding table. This ensures OSPFv3 fast convergence.

Pre-configuration Tasks

Before configuring OSPFv3 GR, configure basic OSPFv3 functions.

Updated: 2019-04-08

Document ID: EDOC1100065744

Views: 60061

Downloads: 48

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next