No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

S7700 and S9700 V200R013C00

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, IP Routing Table Management, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the OSPF Network Security Optimization Configuration

Verifying the OSPF Network Security Optimization Configuration

Prerequisites

The configurations for improving security of an OSPF network are complete.

Procedure

  • Run the display gtsm statistics { slot-id | all } command to check the GTSM statistics.
  • Run the display ospf [ process-id ] request-queue [ interface-type interface-number ] [ neighbor-id ] command to check the OSPF request queue.
  • Run the display ospf [ process-id ] retrans-queue [ interface-type interface-number ] [ neighbor-id ] command to check the OSPF retransmission queue.
  • Run the display ospf [ process-id ] error [ lsa ] command to check OSPF error information.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065744

Views: 66605

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next