No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Capability of Passively Creating BFD Sessions on the Egress

Enabling the Capability of Passively Creating BFD Sessions on the Egress

Context

On a unidirectional LSP, creating a BFD session on the active role (ingress node) triggers the sending of LSP ping request messages to the passive role (egress node). Only after the passive role receives the ping packets, a BFD session can be automatically set up.

Perform the following configurations on the egress node of an MPLS TE tunnel.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bfd

    The BFD view is displayed.

  3. Run mpls-passive

    The capability of passively creating BFD sessions is enabled.

    After this command is run, a BFD session can be created only after the egress receives an LSP Ping request containing a BFD TLV from the ingress.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 24551

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next