No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Static BFD for Static LSPs

Verifying the Configuration of Static BFD for Static LSPs

Prerequisites

The configurations of the static BFD for static LSP function are complete.

Procedure

  • Run the display bfd configuration { all | static } command to check the BFD configuration.
  • Run the display bfd session { all | static } command to check information about the BFD session.
  • Run the display bfd statistics session { all | static } command to check statistics about BFD sessions.
  • Run the display mpls static-lsp [ lsp-name ] [ { include | exclude } ip-address mask-length ] [ verbose ] command to check the status of the static LSP.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 20336

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next