No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Dynamic BFD for LDP LSPs

Verifying the Configuration of Dynamic BFD for LDP LSPs

Prerequisites

The configurations of the dynamic BFD for LDP LSP function are complete.

Procedure

  • Run the display bfd configuration all [ verbose ] command to check the BFD configuration (ingress).
  • Run the display bfd configuration passive-dynamic [ peer-ip peer-ip remote-discriminator discriminator ] [ verbose ] command to check the BFD configuration (egress).
  • Run the display bfd session all [ verbose ] command to check information about the BFD session (ingress).
  • Run the display bfd session passive-dynamic [ peer-ip peer-ip remote-discriminator discriminator ] [ verbose ] command to check information about the BFD established passively (egress).
  • Run the display mpls bfd session [ statistics | protocol ldp | outgoing-interface interface-type interface-number | nexthop ip-address | fec fec-address | verbose | monitor ] command to check information about MPLS BFD session (ingress).
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 23418

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next