No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring LDP Security Mechanisms

Configuring LDP Security Mechanisms

LDP security mechanisms such as LDP MD5 authentication, LDP Keychain authentication, and LDP GTSM can be configured to meet high network security requirements.

Pre-configuration Tasks

Before configuring LDP security features, configure basic functions of MPLS LDP. For details, see Configuring Basic Functions of MPLS LDP.

Configuration Procedure

You can perform the following configuration tasks in any sequence as required.You can configure only either of LDP MD5 authentication and Keychain authentication for one neighbor at the same time.

Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 25842

Downloads: 28

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next