No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling the RSVP GR Helper Function

(Optional) Enabling the RSVP GR Helper Function

Context

By being enabled with RSVP GR Helper, a device supports the GR capability of its neighbor.

RSVP GR takes effect on the RSVP GR-enabled neighbor automatically after the neighbor is enabled with RSVP GR. If the GR node's neighbor is a GR node, do not perform the following configurations. If the GR node's neighbor is not a GR node, perform the following configurations.

Perform the following configurations on GR Helper nodes.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run mpls rsvp-te hello support-peer-gr

    The function of RSVP GR Helper on the neighbor is enabled.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 20159

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next