No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adjusting the Establishment of an MPLS TE Tunnel

Adjusting the Establishment of an MPLS TE Tunnel

During establishment of an MPLS TE tunnel, specific configurations are required in practice. MPLS TE provides multiple methods to adjust establishment of MPLS TE tunnels.

Pre-configuration Tasks

Before adjusting establishment of an MPLS TE tunnel, complete the following task:

Configuration Procedure

The following configurations are optional and can be performed in any sequence.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 26395

Downloads: 32

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next