No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Delayed Transmission of Label Withdraw Messages

(Optional) Configuring Delayed Transmission of Label Withdraw Messages

Context

An LSP on a local node flaps because an LDP session between the node and its downstream peer flaps, a route flaps, or an LDP policy is modified. The local node repeatedly sends Label Withdraw and Label Mapping messages in sequence to upstream nodes. This causes the upstream nodes to repeatedly tear down and reestablish LSPs. As a result, the entire LDP LSP flaps. The label withdraw delay function prevents the entire LDP LSP from flapping.

Perform the following steps on each node of an LDP LSP:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls ldp

    The MPLS-LDP view is displayed.

  3. Run label-withdraw-delay

    The label withdraw delay function is enabled.

    By default, the label withdraw delay function is disabled.

  4. Run label-withdraw-delay timer time

    The delay time for a Label Withdraw message to be sent is set.

    The default delay time is 5 seconds.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 25890

Downloads: 28

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next