No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configure BGP Auto FRR

(Optional) Configure BGP Auto FRR


On an inter-AS seamless MPLS+HVPN network that has protection switching enabled, if a link or node fails, traffic switches to a backup path, which implements uninterrupted traffic transmission.

If both LDP FRR and BGP Auto FRR functions are configured, only BGP Auto FRR takes effect.


  1. Run system-view

    The system view is displayed.

  2. Run bgp { as-number-plain | as-number-dot }

    The BGP view is displayed.

  3. Run ipv4-family unicast

    The BGP-IPv4 unicast address family view is displayed.

  4. Run auto-frr

    BGP Auto FRR is enabled for IPv4 unicast routes.

  5. Run bestroute nexthop-resolved tunnel

    Labeled BGP IPv4 unicast routes can participate in route selection only when their next hops are iterated to tunnels.

  6. (Optional) Run ingress-lsp protect-mode bgp-frr

    BGP FRR is enabled for BGP LSPs.


    Perform this step on each AGG and MASG to enable the protection switching function for the whole BGP LSP.

Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 25982

Downloads: 28

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next