No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting the Tunnel Interface

Resetting the Tunnel Interface


To make the tunnel-related configuration take effect, you can run the mpls te commit command in the tunnel interface view and run the reset command in the user view.


If the configuration is modified in the interface view of the TE tunnel but the mpls te commit command is not configured, the system cannot execute the reset mpls te tunnel-interface tunnel command to re-establish the tunnel.


  1. Run the reset mpls te tunnel-interface tunnel interface-number command to reset the tunnel interface.
Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 24333

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next