No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Dynamic BFD for LDP LSPs

Configuring Dynamic BFD for LDP LSPs


You do not need to specify BFD parameters when configuring dynamic BFD for LDP LSPs. Dynamic BFD for LDP LSPs speeds up link fault detection and reduces the configuration workload. This configuration is simple and flexible.

When configuring dynamic BFD for LDP LSPs, pay attention to the following points:
  • Dynamic BFD only monitors the LDP LSP that is established using a host route.
  • The forwarding modes on the forwarding path and reverse path can be different (for example, an IP packet is sent from the source to the destination through an LSP, and is sent from the destination to the source in IP forwarding mode), but the forwarding path and reverse path must be established over the same link. If they use different links, BFD cannot identify the faulty path when a fault is detected.

Pre-configuration Tasks

Before configuring the dynamic BFD for LDP LSP, configure a local LDP session. For details, see Configuring Basic Functions of MPLS LDP.

Configuration Procedure

Configure dynamic BFD for LDP LSPs according to the following sequence.

Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 24021

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next