No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling MPLS

Enabling MPLS

Context

Perform the following steps on each LSR in an MPLS domain:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    MPLS is enabled globally and the MPLS view is displayed.

    By default, no node is enabled with MPLS.

  3. Run quit

    Return to the system view.

  4. Run interface interface-type interface-number

    The interface to participate in MPLS forwarding is specified.

  5. (Optional) On an Ethernet interface, run undo portswitch

    The interface is switched to Layer 3 mode.

    By default, an Ethernet interface works in Layer 2 mode.

  6. Run mpls

    MPLS is enabled on the interface.

    By default, no interface is enabled with MPLS.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 23580

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next